There are different factors affecting the quality and quantity of CBD oil such as quality of the plant, method of extraction, and extraction skills. It’s no secret that the CBD industry is booming, but exactly how great is the ROI of hemp farming? How much CBD is produced per acre of hemp, or rather, how much CBD is in hemp oil after extraction? According to a 2020 survey, the average CBD yield was approximately 1,520 pounds per acre, but what does that actually me When we are asked, “How much CBD is in a gram?”, our first response is, “A gram of what?” How Much CBD is in a Gram of CBD Oil? There is 600 mg of CBD in the well loved bottle of Cordial Organics Balance. The one ounce bottle, or 30 ml, translates to a total
How Much CBD Oil From One Plant? [Update For 2022]
Although it is difficult to give an exact figure, it is possible to estimate how much CBD oil per plant is generated. Growing hemp is a difficult task, and it is only logical to optimize the profits whenever feasible.
The cannabis industry is evolving and developing all the time. Every few years, hemp growers upgrade and replace their equipment, resulting in higher CBD output. This not only boosts company revenues, but it also gives customers better CBD gummies, CBD cream, CBD capsules, CBD oil tinctures, and other CBD products.
We will go deeper into hemp farming and how farmers are cultivating cannabis in an environmentally friendly manner, and we will introduce one of the best brands of CBD oil based on our research.
What Methods Are Used to Extract CBD Oil?
CBD oil is obtained by extracting it from hemp plants (Cannabis Sativa). It is important to remember that CBD oil is not the same as cannabis or hemp seed oil. Cannabis oil is derived from the Cannabis Indica plant, which is a type of marijuana. Hemp seed oil is derived from the seeds of the hemp plant. Cannabidiol is obtained from hemp flowers, leaves, and stems in comparison.
Hemp, not marijuana, is used to make the majority of medical cannabis products. In terms of THC content, these two are vastly different. To put it another way, marijuana has a far higher total THC level than medicinal marijuana, which is why it is still illegal in many nations. Hemp, on the other hand, contains substantially more of the desired cannabinoid CBD. CBD levels in some strains can be as high as 20%.
Full spectrum CBD oil is the most basic form. Hemp processors can distill the material further to produce CBD isolate or broad spectrum CBD oil. Each of these oils has its own set of constituents.
How Much CBD Oil Can One Plant Produce?
One hemp plant yields roughly one pound of CBD tincture. Hemp plants have the advantage of being able to be packed tightly together. So, with a whole acre of plants, you may expect to obtain roughly 1,500 pounds of CBD hemp flowers. All of this will yield about 200 pounds of oil. Despite the fact that the price of medical hemp oil fluctuates, a hemp harvest of this magnitude might earn you more than $20,000.
Needless to say, the more the plant is processed, the less substance it produces. It is possible to get 140 pounds of isolate and 160 pounds of broad spectrum oil from said amount of hemp. Of course, because the prices of these oils are higher, you will not lose money. However, you may need to spend more money and time to set up the distillation process.
Hemp flowers are only produced by female plants. You must be extremely cautious when purchasing hemp seeds so you do not buy male plants. While the oil may be made from any part of the plant, flowers have the highest CBD percentage.
The Most Important Elements Which Influence the Overall CBD Quantity
Although these figures appear to be impressive in theory, most businesses overrun (or undershoot) their quotas. Companies that are efficient and have modern technology and agricultural knowledge can create higher yields. The following are some of the elements that influence the overall CBD amount:
Method of extraction
CO2 extraction is the best but most expensive approach. Other methods may be less expensive, but they may leave a harmful residue. In the following paragraphs we will discuss this issue in detail.
The quality of the plant
The quicker you can make the plant, the better. If you want to know how much CBD oil can one plant produce and optimize it, you should consider the traits and genetic potentials of a given strain..
Efficiency as a whole
It is critical for technicians to be knowledgeable about the equipment, extraction methods.
As you could expect, your technicians will become accustomed to the equipment and cultivation, resulting in higher total yields and oil outputs. Using private label and white label services is a popular practice in the cannabis industry.
Considering all the factors above, and users’ comments online, the Cureganics CBD oil is one of the best CBD oils available on the market.
How Is CBD Extracted from Cannabis?
The Cannabis sativa family is divided into marijuana and cannabis. Although both contain CBD, cannabis (how convenient) contains very little (less than 0.2%) THC compared to marijuana and can be grown legally by farmers in many parts of the world. This is why CBD is extracted from raw materials and ground cannabis.
Depending on the purification steps after the first extraction, different types of extracts are produced from full to broad spectrum CBD to CBD isolate. However, each process starts and is determined by choosing a method for this initial extraction, so let’s look at the most common options.
CBD Extraction with Alcohol
The alcohol used for extraction is usually ethanol or isopropyl alcohol, both of which are solvents often used in food production. The herbal substance is saturated with it, then the solution is filtered with the extract components from the mixture and the alcohol is distilled out.
The so-called crude extract is then further distilled to remove, for example, chlorophyll (the green color of plants) or unwanted cannabinoids such as THC while enriching cannabinoids such as CBD.
Alcohol extraction is the most widely used method for CBD extraction worldwide. The solvent can be recycled and used for later extraction, saving money and resources. It also does not require overly specialized equipment.
CBD Extraction with CO2
If you have read anything about CBD extraction, you have probably come across CO2, the cleanest solvent possible. CO2 is usually a gas, but when pressure and temperature are properly regulated, it can be the so-called ‘supercritical fluid’ used as the extraction medium.
The extraction process is essentially similar to alcohol, except that a more complex setting is required to handle the high pressures caused by the use of liquid CO2. On the positive side, more set points allow more unwanted components to be removed from the beginning and the solvent (CO2) to evaporate easily at the end of the process without leaving any trace in the product.
CO2 mining has become commonplace in recent years, but the high operating costs and specialized equipment required may be a problem.
CBD Extraction with Vegetable Oil
Extracting cannabinoids with vegetable oils is probably the oldest method in history and is therefore worth mentioning here. The oil is “injected” with the hemp raw material, which slowly releases its oil-soluble components, just like brewing a cup of tea.
The main drawback is that the oil is not easily removed, which means that the concentration of cannabinoids in the product remains relatively low and it is not possible to selectively remove unwanted components such as THC. Vegetable oils are also relatively expensive and ineffective compared to CO2 or alcohol.
CBD Extraction with Butane
Like ethanol and CO2, butane can be used as an effective solvent for cannabinoids when passing through dry plant materials. The initial gravity of the oscillations is high, which causes all the effects of this solvent to be eliminated by using a small amount of heat or a small vacuum. However, it is highly explosive and flammable, making it difficult to work with. In addition, it is not a preferred solvent for use in food products.
The resulting extract still has a high content of trepens and normal THC levels and is usually not further refined.
CBD Extraction with Pressure
This method results in a product that is very similar to butane extraction but completely without the use of solvents. Instead, high pressure and heat are used to obtain the resin extract directly from plant materials. The more pressure it uses, the less heat must be used, leaving valuable terpenes intact. This method has become increasingly popular with smaller manufacturers looking for full-spectrum extracts, while still retaining the natural content of THC, terpenes and other plant compounds.
Based on our research Cureganics is one of the few CBD companies that uses a strict extraction procedure to ensure that only the highest-quality CBD products are made.
All Cureganics products are tested for purity using high-performance liquid chromatography to ensure the highest quality and efficacy. Cureganics products also have a Colorado Department of Public Health and Environment-approved Free Sale Certificate.
As you can see, there are different ways to extract CBD from hemp. The choice of method depends on various factors such as the intended use of the extracted product and economic and environmental considerations as well as the available equipment.
How Much CBD is Produced Per Acre of Hemp?
It’s no secret that the CBD industry is booming, but exactly how great is the ROI of hemp farming? How much CBD is produced per acre of hemp, or rather, how much CBD is in hemp oil after extraction?
According to a 2020 survey, the average CBD yield was approximately 1,520 pounds per acre, but what does that actually mean?
In order to get some final numbers regarding how much CBD you can get from an acre of hemp, we need to break hemp farming down into three numbers: how many hemp plants you can grow on one acre of farmland, how much hemp oil product those plants will produce, and how much CBD is actually in the hemp oil.
- The amount of CBD produced from one acre of hemp varies greatly depending on the CBD concentration in the hemp material, the extraction methods used, farming efficiency, and more.
- In general, you can expect to get one pound of crude CBD oil from each hemp plant, which can then be refined further to create a final product.
- The amount of CBD products you can create from an acre of hemp depends on the potency of each product and the formula needed.
How Much Hemp Can Be Grown Per Acre?
In general, you can grow roughly 1,500 to 3,000 hemp plants per acre depending on the size of the hemp cultivar you choose and the space between each hemp plant. Adequate sunlight is crucial for CBD production, so it’s recommended that hemp plants are spaced between 3 and 5 feet apart.
Hemp is incredibly versatile and can be used to make paper, textiles, building materials, food products, and, of course, CBD products. The type of product you intend to make determines the type of hemp you’ll need to grow and how much hemp you can grow on an acre of land.
To produce CBD, you’ll need to grow female hemp plants because only female plants produce flowers, and the flower is the richest source of cannabinoids like CBD. You’ll also want to grow a strain of hemp designed for CBD production (as opposed to industrial hemp, which is typically farmed for its fiber or oil content).
Flowering hemp plants generally need more space and sunlight than male plants, so you may find your total capacity for hemp to be on the lighter end, around 1,500 plants per acre.
In a 2018 trial run by the Northwest Crops and Soil Program at the University of Vermont, a single hemp plant spaced 5 by 5 feet apart weighed 9.11 pounds on average. That means that one acre of land can yield approximately 13,665 pounds of hemp biomass that can be used to produce hemp CBD oil.
How Much CBD Oil Can Be Produced From One Hemp Plant?
The answer to this one is pretty complicated because the factors regarding CBD content in hemp can vary greatly. On average, one hemp plant will make approximately one pound of crude oil, or a raw oil product that hasn’t been fully refined.
Crude hemp oil contains CBD and many other plant compounds, like other cannabinoids and terpenes, as well as plant materials that may need to be removed to improve the taste and texture of the final oil.
Of course, our “one pound” estimate is just that—an estimate. The actual amount of crude CBD oil you will get from one single hemp plant depends on various factors, including the:
- size and quality of each plant
- soil quality and farming methods used
- original CBD potency in the hemp cultivar you chose
- extraction method used (read more about Hemp and CBD Extraction Techniques to learn more)
- efficiency of extraction (how much product is lost during production)
- type of hemp product used (biomass vs flower-only extractions)
How Much CBD is in Hemp Oil?
As we mentioned, the initial oil produced from hemp is a crude oil, or an unrefined product that contains an array of plant compounds. Crude oil can be sold wholesale to manufacturers, but it needs to be refined if you intend to create a “final product” like a CBD tincture or gummy.
The amount of CBD in the final oil depends on varying factors, like the CBD concentration in the original plant material, the refinement methods used, and the desired resulting product.
For instance, if you aim to produce full spectrum CBD oil, or a CBD product that contains an array of hemp-derived cannabinoids and terpenes, you’ll be able to produce significantly more from the same amount of crude oil than if you were to make CBD isolate, a pure form of CBD.
Some refinement methods are more efficient than others, but the largest discrepancy is in the potency of the original crude oil. Because CBD potency can range from 3-20% in different hemp cultivars, the CBD potency in the crude oil can also range from 20-75%. Because of these huge discrepancies between hemp crops, it’s impossible to say how much CBD you will get from a single hemp plant or an acre of hemp, but we can make general estimates:
Conclusion: How Much CBD is Produced Per Acre of Hemp Plants?
If you add all of the above factors up, you’ll find that one acre of hemp can produce roughly 1,500 hemp plants, or roughly 1,500 pounds of crude oil. The amount of CBD available depends on the total potency in the original material, but crude oil may contain around 50-65% CBD. On the higher end, this means that you can produce around 975 pounds of CBD oil from one acre of hemp.
Keep in mind that there are numerous factors that affect the CBD yield from an acre of hemp, and it is ultimately impossible to predict how much CBD you can produce from hemp. In perfect conditions, farmers have reported much higher yields than suggested above, while others have suggested that they pulled nearly half that amount from a full acre of hemp.
The answer to “how much CBD is produced per acre of hemp” truly depends on the details, starting with the potency of the hemp cultivar and the soil quality and ending with the particular refinement methods used during production. Over time, hemp producers can gain a better understanding of their CBD yields and improve production rates, allowing them to make better predictions about their CBD yields from crop to crop.
How Much CBD is in a Gram?
There is 600 mg of CBD in the well loved bottle of Cordial Organics Balance. The one ounce bottle, or 30 ml, translates to a total of 28.35 grams. Back to the original question: How much CBD is in one gram? One gram of Balance has 21.16 mg of CBD. Much easier to remember: One mg of CBD per drop.
How Much CBD is in a Gram of Flower?
This is a potentially complicated answer for a straightforward question. Hemp, like marijuana has three species: Cannabis sativa, cannabis indica and cannabis ruderalis. Within the species there are many strains. A gram of the strain ACDC flower will yield a different amount of CBD than a gram of the strain Panama Red. To further complicate the question, extracting CBD from different parts of a plant will yield different totals. One gram of stalk will have a different CBD quantity than one gram of flower. How much CBD is in one gram? One gram of hemp flower will generally yield between 100-200 mg of CBD.
How much CBD is in a Gram of Hemp Seeds? Hemp Oil?
The health benefits of hemp seeds and hemp oil are plenty. See this post about how and why you should invite hemp hearts (de-hulled hemp seeds) and hemp oil into your diet. How much CBD is in one gram? One gram of hemp seeds or hemp oil contains little or no CBD.
How Much CBD is in a Gram of Isolate?
Isolate is a powder-like substance that is pure CBD. Through the process of extraction, the CBD molecule is isolated from the other molecules in the cannabis plant. We discussed various extraction methods in this blog post. How much CBD is in one gram? Depending on the isolate one gram of isolate contains 99% CBD.
How much CBD is in a gram of High Quality Weed?
Another potentially complicated answer due to species, strains and plant molecular diversity. However, let’s assume the phrase high quality weed means the type of high THC flower one might smoke recreationally to get high. If a weed plant is high in THC it is typically not high in CBD. How much CBD is in one gram? Blueberry Kush, for example, has no CBD.