It is essential to understand the various CBD extraction methods as they significantly impact the quality of the end product, not to mention your health. We don’t recommend utilizing the solvent method because it is dangerous to make and is also more likely to cause health problems. The cost of CO2 supercritical extraction means it is not possible for 99.9% of readers, but it is an excellent, safe, and efficient method.
If you are reading this article, you likely know what THC is. Delta-9 tetrahydrocannabinol is the most psychoactive ingredient in cannabis, and until recently, was by far the best-known.
The first step in olive oil extraction, which can be performed at home, involves ensuring the raw plant material is decarboxylated. In layman’s terms, it means you have to heat the plant to a certain temperature for a specific length of time to activate the plant’s chemicals.
4 – The Solvent Extraction Method
Turn the bucket upside down on the Plexiglas and shake as much resin through the mesh bag as possible. Scrap the hash off the Plexiglas with your scraper and place it into one of the jars. Repeat with the 160 and 220-micron mesh bags, and you’ll be rewarded with three different strains of extract.
This form of CBD extraction is actually divided into supercritical, subcritical, and ‘mid-critical’ categories. But supercritical is by far the most commonly used. In fact, it is the most regularly used extraction method of all because it is safe and provides a pure end product.
CBD oil made from hemp is legal in many countries around the world, including in all 50 states in the U.S., because of the negligible THC content.
THC is renowned for the mind-altering high it induces when consumed. In contrast, CBD is not psychoactive, but it does promote positive changes in the body.
At this point, you may be wondering if there’s any way you can extract CBD at the comfort of your own home. The short answer is “yes”, but it really depends on how willing you are to do further research. The following is not going to be a real step-by-step guide, but it can serve as a starting point and give you some basic guidelines.
Steam distillation is a centuries-old process that’s commonly used to distill alcohol as well as extract essential oils from organics. The process is much less complicated than CO2 CBD extraction. First, plant matter is introduced in a distillation tank. With the use of water and heat, the produced steam carries oils to the top of the tank, and it is then passed through a condenser, resulting in a mix of water and oil. The mix then goes through further distillation to separate water and oil, and the result is full-spectrum CBD oil.
Solvent extraction is a delicate CBD extraction process and its pros and cons, as well as the consistency of the resulting oil, varies greatly depending on the solvent used. It can be more efficient than steam distillation if performed properly, but it carries a lot of risk and most labs choose CO2 extraction if they can afford it.
Olive oil extraction
While this CBD extraction process is much simpler, there are some downfalls. It is more prone to error, much less efficient, and may potentially damage part of the essential oil profile of the plant. Due to these reasons, steam distillation is very rarely used to extract CBD nowadays, but many labs still use some type of distillation in the process of isolating CBD from full-spectrum oil.
When supercritical CO2 is used in CBD extraction, its gas properties allow it to effuse through all plant matter, while its liquid properties allow it to extract compounds efficiently. The exact process varies, and some labs start the extraction with liquid CO2 while others start with CO2 in gas form. In both cases, manufacturers add CO2 in a chamber that includes plant material and use the exact amounts of pressure and temperature needed for CO2 to reach its supercritical state. At this point, and with the help of some additional heat, CO2 acts as a solvent and causes the plant material to separate, carrying with it all the essential compounds. Once done, CO2 is separated from the organic compounds, and manufacturers are left with full-spectrum CBD oil.
In layman’s terms, this type of extraction involves mixing plant material with some type of solvent that will carry the essential oils given the right conditions and enough time. Some of the most popular natural solvents are alcohol (ethanol) and natural plant oils (including olive oil), with alcohol being much more efficient in dissolving the plant’s compounds. But due to the higher cost associated with ethanol, many manufacturers choose to go with synthetic solvents (hydrocarbons like butane or hexane), which may end up in lower quality, or even CBD oil that’s unfit for consumption if they’re not removed properly from the final product.
These are the most commonly used CBD extraction methods and, as expected, each comes with its own advantages and disadvantages. The main takeaway from this guide should be that the reason you may have seen “supercritical CO2 extraction” in ads and promotions is not just that it sounds cool (although it does!) Simply put, CO2 extraction is by far the cleanest and most efficient CBD extraction method—and a no-brainer for any lab that can actually afford it.
After the initial heating, you then heat the hemp matter further in the olive oil, a process by which the compounds are extracted to the oil. Whilst this is perfect for home users, it results in a low yield and a highly perishable product that isn’t practical on a mass scale.
As mentioned earlier, grasping why a clean and accurate extraction is important is premised on understanding just what is being extracted. Read on here for our piece on whole plant CBD, and our supporting articles on terpenes and flavonoids.
At Vitality CBD we often discuss the importance of choosing a quality CBD oils, and how premium extraction techniques contribute to a better product. To truly understand why high-end extraction methods matter, let’s first explore how CBD is synthesised.
Olive oil CBD extraction
As we’ve mentioned, CBD is actually a constituent in a vast sea of hemp compounds, so extraction isn’t as easy as it first may seem. However, all of these techniques were first developed for other purposes, like extracting essential oils from flowers.
Whilst the yield is smaller than with supercritical, it also allows for lighter oils and other sensitive compounds that might otherwise be dismantled in the process to be extracted. However, the trade off is that heavier, more resinous material will typically get left behind.
The shared methodology between the two essentially entails running pressurised carbon dioxide across the hemp plant to strip away the desired phytochemicals (literally: plant chemicals). When treated to certain conditions, CO2 actually acts like a solvent, without any of the potential side-effects.
At Vitality CBD we use two different techniques specifically (typically in conjunction) but we’ll discuss all the options available, and how they affect the end result. As always, if you have any further questions drop us an email on our contact page.